Renice X5 50mm mSATA SSD 60GB

Features:

- Form factor: 50.95mm X 30mm X 3.65mm (LxWxH)
- Interface standard: mSATA
- Weight: <10g
- Density: 60GB (MLC)
- Support NCQ
- Read endurance:Unlimited
- Support hardware BCH ECC engine:12/24/40-bit per 1 KB

Performance:

- Max Read Rate: 250MB/s
- Max Write Rate:100MB/s
- Access Time: 0.1ms
- Host Transfer Rate: 3.0Gb/s

Power Consumption and Environment

- Input voltage: 3.3V±5%
- Commercial operating temperature: 0 to 70°C
Industrial operating temperature:-40 to +85°C
- Storage temperature: -50 to 95°C

Reliability:

- MTBF: >3,000,000 hours
- S.M.A.R.T features optimized for SSD
- Dynamic and static wear-leveling
- Dynamic bad block management
- SMART commands and additional SSD monitoring
- Data retention:10 years(@25)

Renice SSD Compatibility List

(If you don't know what Renice SSD you may buy for your PC, you can please refer to below Renice SSD compatibility list.)

WARRANTY

3 YEARS Warranty for All Renice Products on B2CIT.COM

"Do you have a guarantee or warranty?"

- Yes - B2CIT only chooses to stock the very best quality products from professional China manufacturers. The quality is guaranteed.
- All products that arrive in the B2CIT warehouse are checked for perfect appearance and correct functionality.
- Our packing staff check again to make sure that the right accessories.

All RENICE products on B2CIT.COM are covered by a 3 YEARS WARRANTY.

Due to our stringent sourcing and QC processes, the fault rate on products shipped out by B2CIT is very low. However, sometimes faults develop which couldn't be detected before, and we will help you solve these problems properly.

If you have any difficulties whatsoever with the products, or you are dissatisfied for whatever reason, you can contact us and we will discuss the issue in an open, honest way.

If you have a problem with a product you bought from us before, please click here to read about what you can do now.

·         In general, if a product develops a fault during the 3 years since you received it, and the fault is due to a quality issue rather than your own breakage or misuse, we will accept a return.

·         Customers need to pay the cost of returning faulty products back to the B2CIT returns address in either Hong Kong or China as instructed by Customer Support.

·         Returns without prior discussion and authorization will not be accepted.

·         When we receive your authorized return we will repair the product for free and send it back to you for free. Repairing may involve changing parts, for example some Nand flashes. In general you will receive back, fixed, the same product you returned to us.

·         If a repair is impossible we will replace it with a new one for you.

Please tell us if you are a drop-shipper and have returns issues with B2CIT goods you have sold to your customers: we can do RMA directly with your customers or they can do it through you (recommended).